零件固定联接新方法的研究

通过理论分析与计算,提出了一种代替键、销、螺钉等零件固定联接的新方法,简化了制造工艺,降低了成本,保证了联接的可靠性。     

Pro/ENGINEER2001中连接与伺服驱动的定义技巧

在使用Pro/ENGINEER2 0 0 1的机械模块对机构运动进行仿真时 ,正确有效地定义各连接件之间的连接形式以及正确地定义伺服驱动是一个关键步骤 ,论述了在实际经验中总结出的一些技巧 ,可以提高仿真的速度     

钢结构建筑组合节点的分析模型

针对钢 -混凝土组合节点的工作特性 ,简要介绍了组合节点的 4种分析模型 ,可供采用组合节点的结构分析与设计参考     

锚杆静压桩施工过程及正常工作中的桩身应力分布研究

结合某具体工程,对锚杆静压桩在压桩过程及建筑物荷载作用下承载力的发挥过程及承载力的组成因素进行试验研究,在有效控制建筑物压桩施工及后续沉降方面得到一些有益的结论。     

岩壁吊车梁轮压荷载的等效计算研究

轮压荷载是设计中的一个主要荷载,但其确定方法目前尚无明确规范可循。为比较设计计算中合理的轮压荷载确定方法,建立了岩壁吊车梁二维和三维有限元计算模型,采用设计中多种轮压简化计算方法进行二维计算,并与完全轮压荷载情况下三维有限元计算结果加以比较分析,获得与三维计算结果最为接近的轮压荷载简化确定方法,为以后的设计工作提供有效参考。     

Effect of bar shape on the pull-out capacity of fully-grouted rockbolts

This paper presents experimental results obtained from the direct pull-out test using different types of rockbolts having different shape of lugs. These are smooth surface bars, ribbed bars, single conical lugged bars, double conical lugged bars and triple conical lugged bars. It is found that the failure mechanism of the conical lugged rock bolt is different from that of conventional rockbolts, in which the adhesion or the shear strength at the bolt–grout interface provides the load bearing capacity. From the results of experimental study, the use of the conical lugged rock bolts is suggested, because it provides a greater anchorage strength due to wedging effect that is a combination of the shear and compressive strength of the grouting material.     

钢框架-混凝土剪力墙混合结构的简化计算方法

提出了钢框架——混凝土剪力墙混合结构体系的一种基于连续化方法的简化计算方法，该方法考虑了这种结构中钢框架部分的受力和变形特点，即节点柔性连接(或称半刚性连接)，在本方法中同时也可考虑梁柱二阶效应的影响。明确了在进行钢框架——混凝土剪力墙混合结构的计算分析时，应考虑节点柔性连接和梁柱效应。推导了考虑节点柔性连接和梁柱效应时，钢框架——混凝土剪力墙混合结构中钢框架部分的层间抗侧刚度。该方法物理概念清楚，计算简便，可供设计人员参考。     

Development of moment-rotation model equations for flush end-plate connections

This paper presents the development of Ramberg-Osgood and Three-Parameter Power model prediction equations for the moment-rotation (M-θ) behavior of flush end-plate connections with one row of bolts below tension and compression flanges. A finite element model (FEM) of the connection region along with the connected beam and column is developed for load deformation analyses, which included material, geometric, and contact nonlinearities. The FEM model was verified with test results conducted and reported for flush end-plate connections in the literature during the 1980s. A matrix of test cases was obtained by varying the geometric variables of flush end-plate connections within their practical ranges. The connection M-θ data for these test cases were obtained by FEM analyses, which were then curve fitted to Ramberg-Osgood and Three-Parameter Power model equations to obtain parameters defining these equations. Finally, prediction equations were developed for parameters of the model equations as functions of geometric variables of the flush end-plate connections.     

热力站的本地控制方式

介绍了采用S7-300系列控制器的间接连接式热力站、混水连接式热力站本地控制系统的控制器模块组成及输入、输出参数的选取。分析了S7-300系列控制器的主要功能。探讨了两种热力站的本地控制方式。     

关于钢结构连接设计的一些问题

针对《钢结构设计规范》(GBJ17- 88)关于连接的条文不足之处和实际工程设计出现的问题 ,在焊缝强度设计值、常见构件焊缝质量等级、焊接和焊接检验概念、需进一步补充的内容以及规范对承压型高强螺栓的技术要求等问题进行了探讨 ,对规范的修订提出了意见